Dokument instalacyjny 3d Upfitters Carbon Air Filter

Subskrybuj nasze sieci społecznościowe, aby być na bieżąco z najnowszymi aktualizacjami!

Komentarz

I'm a Nevermore user. Installed a v4 in my Voron V0.1 primarily for PC+CF as it stinks when printing. VERY happy with the resilts. The trick it to use quality activated charcoal. I put a USB controlled relay on this that is easily controlled via Octoprint. Works great, but does add to the fan noise as I'm used to running Noctuas....I wish i could find a Noctual blower style unit.

I know it's mentioned in the video but: MAKE SURE YOUR CARBON IS NOT ACID ACTIVATED! Acid can get left behind and when blown around inside your printer can lead to IMMEDIATE (Within an hour or so) rusting of anything that will rust.. I can't emphasize how horrible this would be.

Hello Kapman,

Thanks for this. I ended up using a simple pair of flush cutters to snip away at the fan. No need for blood on this project ;-). I looked at the assembly pics from the Nevermore designer and saw the female JST connector is part of the design. I had one (or fifty) laying around so added it. The filter looks real nice now. Again, thanks... I didn't know about Nevermore until this video and now I have 2 (I built the v4 too, just to see which one will suit my needs).

Thanks for the video! From my research, it's a good idea to set up the Nevermore as a heater_fan based on a low-ish bed temp (e.g. 40C) so that it runs both during the print and for a little while after the print. Something like this:

There's also a nice fork for resin printing machines (nevermore3d/Resin_Filtration) under development. Really good to see considering the underwhelming commercial solutions available at the moment.

Have you looked at the Max? It's in beta now, would love to hear your thoughts on it. If you have time you should consider joining in on the WIP :)

Thanks for making the video... Seems you are the only one. How did you mount the filter to the frame? I have looked at all the "base" files but don't see anything that makes sense for the v5 Duo? Does it attach or just sit loose below the bed?

This guide saves me! Thanks!

I’m in the process of building mine but I don’t recall seeing anywhere instructing to cut the fans like that. is this required for all fans in this nevermores?

I’m in the process of doing the nevermore but I don’t recall seeing any instructions to cut the fans. Is this required for all fans?

Superglue is too brittle. The concussions from the magnets smacking slowly cracks it up and soon they are pulling out. Use epoxy, lasts forever. Little bit softer and can take the blows. Be sure to lightly burnish the magnet with medium or fin sandpaper for better adhesion.

Been using my nevermore for about 8 mo. Now to figure out what to do with the used/spent pellets. In the garden compost?

Flush cutters are probably the safest

I thought only the v4 needs to fan cover taken off

Bad light in this video, har to see details

this is just smell, particules are still there

can you at least use a headphone mic

.

Zostaw komentarz

#0